How to set up a Smartwatch for Kids Locator?

Locator smartwatches have recently become a hit!

Thanks to them, parents have constant contact with their children, and kids are happy to wear “cool” watches. In addition, it is much more difficult to lose such a watch than a phone.

We get a lot of questions about the configuration of the Smartwatch. That’s why we decided to write a short article about it.

Regardless of the model, the principle is the same:

  1. Charge the Smartwatch
  2. Insert a SIM card into the watch (without PIN code lock and with active internet)
  3. Install the “SeTracker 2” application on your Smartphone
  4. Follow the instructions in the app.

If nothing unexpected happens at this point, you will be able to use the Smartwatch and all its functions.

However, life is not a fairy tale and unexpected situations can happen.

If the watch does not connect to the application then:

  • Send an SMS to the watch locator with the following content: pw, 123456, ts #
  • You will receive a text message with the following text in the header:

ver: G36S _). 96_SHU_V1.00_1.10

or

ver: G36R_V2.00

or something like that (versions change quite often)

After receiving the SMS, send further messages to the watch with the following content:

  • pw, 523681, apn, internet ,,, 26006 #

Attention:
in SMS pw, 523681, apn, internet ,,, 26006 # there are numbers 26006 these are parameters for the Play network
If there is a card of another operator in the watch, you have to put in this place the appropriate numbers according to the table http://www.mcc-mnc.com/

  • pw, 523681, ip, 52.28.132.157,8001 #
  • pw, 123456, ip, 52.28.132.157,8001 #

After sending these messages, wait several minutes for the Smartwatch to download the settings from the network.

 

Leave a Reply

Your email address will not be published. Required fields are marked *